Skip to main content
Ade Advanced Optics Valkyrie (RD3-023) GREEN Dot Sight For any handgun plate/slides/Cuts that are Compatible with Trijicon RMR Screw Pattern/Footprint - 4MOA GREEN Dot

Ade Advanced Optics Valkyrie (RD3-023) GREEN Dot Sight For any handgun plate/slides/Cuts that are Compatible with Trijicon RMR Screw Pattern/Footprint - 4MOA GREEN Dot

Ade Advanced Optics

$60.95
(No reviews yet) Write a Review
SKU:
RD3-023-GEN1
UPC:
640978407526
Availability:
Y
section_1_body:
Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, METE MC9, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0
section_2_body:
Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
section_3_body:
ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brig
section_4_body:
Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
section_5_body:
Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full
section_6_body:
For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.
section_7_body:
ADE Nuwa is manual activated by pressing the on/off switch. Press and Hold switch for 2 seconds to turn on/off, quick press to adjust the brightness from low to high.
section_8_body:
Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol
section_9_body:
ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can?t get the screw to work properly, we recommend
spec_Package Type:
Box
;spec_Item Weight:
1"
spec_Item Height:
2
spec_Item Width:
6
spec_Item Lenght:
9
spec_Contain Lithium Battery:
Y
spec_Lithium Battery Type:
cr2032
spec_Battery Quantity:
1
spec_Battery Weight:
2G
spec_Watt Hour:
0.675Wh
spec_Lithium Content:
.06g
spec_Hazmat:
N
spec_Lithium Battery Packed WithOrNot`:
Packed with
Adding to cart… The item has been added

  •  

    • ADE RD3-023 Valkyrie is a 4 MOA GREEN dot designed to fit any pistol with a PISTOL that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots. 
    •  
    • The Valkyrie fits all pistol with optic cuts for Trijicon RMR/SRO, including aftermarket slide such as Rockslides, Polymer80 that has a optic cut for Trijicon RMR/SRO.
     
    • The Valkyrie also fits name brand pistol manufacturer made Optics Ready pistols, such as Glock MOS, S&W M&P 2.0 OP, IWI Masada, Smith Wesson MP C.O.R.E, CZ P10F/10C optics ready, Walther Q5 Match and Springfield XD/XDM/XDS OSP, Canik TP9 SFX/Combat, FN 509/45 Tactical, Shadow Systems MR 920 using pistol manufacturer provided plate marked for Trijicon RMR footprint. Those name brand pistol manufacturer made "Optics Ready" handguns all come with several mounting plates/optic cuts marked for different brands of red dots, such as for Trijicon RMR, Shield RMS and Vortex Venom red dot footprint. The Valkyrie fits one of the pistol manufacturer provided plate marked that is compatible with Trijicon RMR.
    • ADE Valkyrie created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a "back up iron sight" to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.
    •  
    • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacture equipped rear sight, ADE Valkyrie's rear white dot acts as a pistol factory original rear sight for Co-Witness
    •  
    • Dimension 1.79x1.18x1.4 inches. Weight 1.24 oz. Shockproof/Fogproof. Fully lockable windage/elevation.
    •  
    • 4 MOA GREEN Dot(NOT RED). Comes with a picatinny mounting plate and a pair of screws. This red dot does NOT comes with any other optic plate to mount on an specific pistol
    • Operates with a single CR2032 battery(install underneath). Gives around 800 hour battery life. Auto powers off after 1 hour of inactivity to save battery.
!