Skip to main content
Image coming soon

Ade Advanced Optics STINGRAY RD3-019 Ultra Micro Red Dot Sight For any handgun plate/slides/Cuts that are Compatible with Trijicon RMR Screw Pattern/Footprint - 6MOA Red Dot

Ade Advanced Optics

$65.99
(No reviews yet) Write a Review
SKU:
RD3-019-RED
UPC:
640978407502
Availability:
Y
section_1_body:
This is ADE's new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dot(this one) and FDE/TAN body 4MOA Red dot.
section_2_body:
Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W
section_3_body:
Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
section_4_body:
ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness wi
section_5_body:
4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6 x (Width).92" x (Height).93""
section_6_body:
Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some ful
section_7_body:
For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.
section_8_body:
Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
section_9_body:
Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol
section_10_body:
ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can?t get the screw to work properly, we recommend
spec_Package Type:
Box
;spec_Item Weight:
1"
spec_Item Height:
2
spec_Item Width:
6
spec_Item Lenght:
9
spec_Contain Lithium Battery:
Y
spec_Lithium Battery Type:
cr1632
spec_Battery Quantity:
1
spec_Battery Weight:
2G
spec_Watt Hour:
0.675Wh
spec_Lithium Content:
.06g
spec_Hazmat:
N
spec_Lithium Battery Packed WithOrNot`:
Packed with
Adding to cart… The item has been added
The ADE RD3-019 sensor activated red dot fits all pistols with optic cuts for Trijicon RMR, including aftermarket slide such as Rockslides, Polymer80 and PSA that has an optic cut for Trijicon RMR Pattern.
 

Ade Stingray is Designed to be the smallest and lightest red dot to fit any pistol mounting plate/slide/cut that is compatible with Trijicon RMR/SRO(both type 1 and type 2 RMR), Holosun 407C/507C/508T footprint red dots. The overall length is around 15-20% shorter than other major red dots on the market. The shorter design allow this sight to be able to sit in to all optic cuts/plates/adapters that are designed for RMR footprint. For some optics ready pistols with a larger optic cut, there might be a gap between the rear of the Stingray and pistol rear iron sight. 

Ade Stingray created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistol, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacture equipped rear sight, ADE Stingray's rear white dot will act as a pistol factory original rear sight for Co-Witness.  

 

For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacture equipped rear sight, ADE Stingray's rear white dot acts as a pistol factory original rear sight for Co-Witness.  

 

Just like $400 RMR competitors,  It does not has a on/off power button. The light turns brighter or lower automatically. If you do not use it, put the provided rubber cover on it, then the sight will be "sleeping" in a very very low power mode.  

 

Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens. 

ADE Stingray red dot sight is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws very minimum powers to give a very long battery life.  The brightness will turn high and low accordingly to the environment brightness. 

 

6MOA RED dot

One year battery life

Weight approximately .88oz/25grams

(Length)1.6" x (Width)1.1" x (Height).93"

Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.

 

 

 

 

 

 

 

!