Skip to main content
Image coming soon

ADE SPIKE RD3-018 Micro Red Dot For Canik Elite TP9 SC,Canik METE SFT,Sig Sauer P322/P365-380/P365XL,SW Shield X, MP 5.7, Equalizer 9mm,Ruger Max9,Glock 43/48 MOS,Kimber R7 Mako,Taurus GX4 Toro,605 Toro,856 Toro,Springfield Hellcat OSP/PRO

Ade Advanced Optics

$65.99
(No reviews yet) Write a Review
SKU:
RD3-018-RED
UPC:
640978407496
Availability:
Y
section_1_body:
New advanced battery technology gives up to 3000 hours on bright setting and up to 40k hours on Low setting with a 2032 Battery(Included). Top load system, no need to remove the sight to change the battery.
section_2_body:
The biggest handgun sight on the market! Actual size is. 2.25 Length x 1.4" Width x 1.27" Height. It gives up to twice bigger window than other micro red dot.The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP Shield SIG
section_3_body:
Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. to turn the brightness up and one adjustment button to turn the brightness down. Hold the UP Arrow to power on. Hold th
section_4_body:
The length of this red dot is about 30% longer than other traditional micro/handgun red dots. Therefore, it will NOT fit some Optic Ready handgun model that will keep the rear sight to co-witness the red dot, such as Glock Mos. The size of this red d
section_5_body:
4 MOA dot. Shock proof?Fog proof and Waterproof for 30 minutes under 4ft water. Feature 1 M.O.A wind age and elevation adjustments with audible click. This red dot can also be used with a long range rifle scope for that perfect Backup System.
spec_Package Type:
Box
;spec_Item Weight:
1"
spec_Item Height:
2
spec_Item Width:
6
spec_Item Lenght:
9
spec_Contain Lithium Battery:
Y
spec_Lithium Battery Type:
cr2032
spec_Battery Quantity:
1
spec_Battery Weight:
2G
spec_Watt Hour:
0.675Wh
spec_Lithium Content:
.06g
spec_Hazmat:
N
spec_Lithium Battery Packed WithOrNot`:
Packed with
faq_1_q:
Can the Spike Co-Witness with my factory rear sight ?
faq_1_a:
Yes. Its ultra-low deck height allows co-witness with most factory rear sights, eliminating the need for suppressor-height sights.
faq_2_q:
What footprint does it use and will it fit my setup?
faq_2_a:
It uses the standard RMSc/DDP footprint, compatible with most optic-ready slides or matching plates. Always verify your cut or plate before purchase.
faq_3_q:
Can I install it on a non-optic-ready platform?
faq_3_a:
Yes. Use a compatible RMSc/DDP mounting plate. Many aftermarket options are available, including ADE, C&H Precision, EGW, Outerimpact plates.
faq_4_q:
Where can I get mounting plates or help choosing one?
faq_4_a:
ADE offers 100+ plate options. If unsure — we’re happy to help you find the correct fit.
faq_5_q:
How do I replace the battery and how long does it last?
faq_5_a:
The battery is located underneath the optic. Remove the sight to replace it. Battery life can reach up to 20,000 hours; annual replacement is recommended.
Adding to cart… The item has been added

 

Designed to fit

Bul Armory SAS II lightweight 3.25 Comp

Bul SAS II ULTRALITE

Beretta 80X Cheetah Optic Ready

Canik Elite TP9 SC

Canik METE SFX

Canik METE SFT

Canik Mete MC9

Mete MC9LS

Canik Mete SFT(and Pro)

Canik Rival SFX

CZ P-09C Nocturne

FNH Reflex MRD

Kimber R7 Mako

Kimber Rimfire Super 22LR

Glock 43X MOS/48 MOS(not compatible with regular Glock 43x/48 that are not MOS)

Girsan/EAA Regard MC

Girsan MC1911 SC Ultimate

Girsan Witness2311

Girsan MC1911SC Ultimate

Shadow Systems CR920

Springfield Hellcat OSP/PRO/RDP

Springfield XDS MOD 2 OSP 9mm

Springfield Elite 3.8” Compact OSP 9mm 

S&W CSX E-SERIES 3.6 INCH

S&W Shield 2.0 Optics Ready

S&W Shield X

S&W M&P9 shield plus Optics Ready

S&W M&P shield plus performance center,

S&W MP 22 magnum

S&W M&P shield plus 30 Super Carry

S&W 9mm Equalizer

S&W MP9 EZ

S&W MP 5.7(all series)

S&W M&P shield plus performance center

Stoeger SRT-9MC

Sccy CPX-1, DVG-1 RDR CPX-2 RDR

Sig P320 Xten (Using Sig provided plate marked for Leopold Deltapoint Pro optic footprint)

Sig P320 Spectre Comp

Sig P365X/P365XL/P365XL SPECTRE COMP

Sig P365 X Macro

Sig P365-XMACRO TACOPS

Sig P365 Fuse

Sig P365 California Compliant (Sig released it in late 2023/early 2024)

Sig P322

Sig P365-380(make sure your model is exactly called "P365-380", not P360 or P380)

Sccy cpx-2

Ruger Max-9

Ruger Model 43949 Mark IV 22/45 lite

Walther PPS M2 Optics Ready

Walther PDP Pro SD

Mossberg MC2SC/MC2c

Mossberg 940 pro turkey

Mossberg 940 JM PRO Optic Ready

Masada SLIM

Taurus GX4 Toro 

TaurusGX4 XL Toro

TaurusTX22 TORO

Taurus TX22 Compact

Taurus 865 Toro

Taurus 605 Toro

Tisas PX-5.7 OR

Tisas 1911 Duty Double Stack 9mm

Rock Island STK-100

Plus any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint. 

 

Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness. 

Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens. 

ADE SPIKE red dot sight is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws very minimum powers to give a very long battery life.  The brightness will turn high and low accordingly to the environment brightness. 

4MOA 

Weight approximately .66oz/17.5grams

(Length)1.6" x (Width).92" x (Height).93"

 

Includes Protective Rubber Cover (Battery Saving Feature)
The RD3-018 Spike comes with a fitted rubber protective cover designed to help extend battery life. When the optic is not in use, simply place the cover over the sight. This reduces light exposure to the sensor, allowing the optic to enter an ultra-low power state for maximum battery conservation.

When the cover is removed, the light sensor is exposed again, and the optic will automatically adjust brightness based on ambient lighting conditions for optimal visibility.

 

Screws included

2x M4x0.7 by 7.5mm

2x M4x0.7 by 10mm

2x M3.5x0.5 by 12mm

Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.

 

ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.

 

Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun. 

 

 

 

 

 

 

!